說明書 LG LX-130A

[. . . ] 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1-5 1-6 1-7 1-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 AMD CrossFireX™/NVIDIA SLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Part1-2 Status = Open Part3-6 Status = Open Part4-5 Status = Open Part7-8 Status = Open ) CMOS Setup Utility-Copyright (C) 1984-2011 Award Software SMART LAN / / / / Length Length Length Length = = = = 0m 0m 0m 0m Item Help Menu Level  Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults BIOS Status Open Length 0m Gigabit hub 10/100 Mbps hub Start detecting at Port. . . . . Link Detected --> 100Mbps Cable Length= 30m Link Detected Cable Length hub 10m Cable length less than 10M 10/100 Mbps Windows Gigabit hub 10/100/1000 Mbps Status Short Length MS-DOS LAN Boot ROM hub Part1-2 Status = Short / Length = 2m Part 1-2 2 10/100 Mbps Part 4-5 7-8 Open Length - 51 - Status BIOS Onboard LAN Boot ROM ( R_USB30 Controller (Etron EJ168 USB Etron EJ168 USB ) Boot ROM ( ( Enabled) USB 3. 0/2. 0 F_USB30 Disabled) ) F_USB30 Controller (Etron EJ168 USB USB 3. 0/2. 0 ) Etron EJ168 USB Marvell 88SE9172 ( Enabled) GSATA3 Controller (Marvell 88SE9172 GSATA3 Ctrl Mode (Marvell 88SE9172 IDE AHCI GSATA3_6/GSATA3_7 GSATA3_6/GSATA3_7 SATA ( ) Enabled) ) Marvell 88SE9172 SATA IDE SATA AHCI mand Queuing SATA eSATA3 Controller (Marvell 88SE9172 eSATA3 Ctrl Mode (Marvell 88SE9172 IDE AHCI RAID SATA RAID ( ) AHCI (Advanced Host Controller Interface) Serial ATA Native Com(Hot Plug) RAID eSATA ( ) Marvell 88SE9172 SATA eSATA Enabled) ) Marvell 88SE9172 SATA IDE SATA AHCI mand Queuing SATA Onboard Serial Port 1 ( Auto BIOS Disabled 3F8/IRQ4 ( RAID SATA RAID ( ) AHCI (Advanced Host Controller Interface) Serial ATA Native Com(Hot Plug) RAID ) ) 2F8/IRQ3 3E8/IRQ4 Disabled BIOS 2E8/IRQ3 Auto BIOS - 52 - 2-7 Power Management Setup ( [S3(STR)] [Instant-Off] [Enabled] [Enabled] [Disabled] Everyday 0:0:0 [Enabled] [32-bit mode] [Disabled] [Disabled] Enter [Soft-Off] [Disabled] ) Item Help Menu Level  CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Power Management Setup ACPI Suspend Type Soft-Off by PWR-BTTN PME Event Wake Up Power On By Ring Resume by Alarm x Date (of Month) Alarm x Time (hh:mm:ss) Alarm HPET Support ( ) HPET Mode ( ) Power On By Mouse Power On By Keyboard x KB Power ON Password AC Back Function ErP Support Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type ( S1(POS) S3(STR) S1 S3 ACPI ACPI ) S1 (POS Power On Suspend) S3 (STR Suspend To RAM) ( S1 ) Soft-Off by PWR-BTTN ( Instant-Off Delay 4 Sec. MS-DOS 4 ) ( ) 4 PME Event Wake Up ( ACPI ( Enabled) ) +5VSB PCI PCIe 1 ATX / Power On by Ring ( / ) ( ACPI Enabled) ( Disabled) ) Resume by Alarm ( ) Date (of Month) Alarm: Everyday ( ) 1~31 ( Time (hh: mm: ss) Alarm: (0~23) : (0~59) : (0~59) ( ( ) Windows 7/Vista - 53 - ) BIOS HPET Support ( ) ) ) HPET Mode ( Windows 7/Vista ( Enabled) High Precision Event Timer (HPET Power On By Mouse ( PS/2 +5VSB ( ) PS/2 PS/2 +5VSB ( ) 1~5 Windows 98 mode) 64-bit mode Windows 7/Vista HPET 32-bit Windows 7/Vista 32-bit mode 64-bit Windows 7/Vista HPET Support ( 32-bit ) / 1 ATX Power On By Keyboard ( Disabled Double Click ) / 1 ATX KB Power ON Password ( Power On by Keyboard <Enter> Disabled Password Keyboard 98 ) <Enter> AC Back Function ( Soft-Off Full-On Memory <Enter> <Enter> <Enter> 1~5 Password ) ( ) ErP Support (S5 ) 1 ( Disabled) ( ) Windows 7/Vista - 54 - BIOS 2-8 PC Health Status ( Reset Case Open Status Case Opened Vcore DDR15V +12V Vcc3 Vcc Vtt Current System Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN2 Speed Current POWER FAN Speed Current SYSTEM FAN1 Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN2 Fail Warning POWER FAN Fail Warning SYSTEM FAN1 Fail Warning [Disabled] No 1. 172V 1. 536V 11. 779V 3. 205V 5. 042V 1. 076V 30oC 47oC 3375 RPM 0 RPM 0 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] +/-/PU/PD: Value F6: Fail-Safe Defaults ) Item Help Menu Level  CMOS Setup Utility-Copyright (C) 1984-2011 Award Software PC Health Status Enter: Select : Move F5: Previous Values F10: Save ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2011 Award Software PC Health Status CPU Smart FAN Control x Slope PWM CPU Smart FAN Mode [Normal] 1. 75 PWM value /oC [Auto] Item Help Menu Level  Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Reset Case Open Status ( Disabled Enabled ) ( ) Case Opened ( CI Ye s ) No Current Voltage(V) Vcore/DDR15V/+12V/Vcc3/Vcc/Vtt ( Status Enabled Reset Case Open ) - 55 - BIOS Current System/CPU Temperature ( /CPU /CPU ) ) Current CPU/SYSTEM/POWER FAN Speed (RPM) ( CPU Warning Temperature (CPU CPU Disabled ( CPU/ / ) CPU ) 60 o C/140 o F 70 o C/158 o F CPU/SYSTEM/POWER FAN Fail Warning (CPU/ 80 C/176 F 90 C/194 F o o o o / ( Disabled) CPU ) CPU Smart FAN Control (CPU Normal CPU CPU CPU ( ) Slope PWM CPU ) EasyTune Slope PWM (CPU CPU Silent CPU Manual Disabled CPU ) CPU Smart FAN Control 0. 75 PWM value /oC ~ 2. 50 PWM value /oC Manual CPU Smart FAN Mode (CPU Auto Voltage PWM 3-pin 4-pin CPU ) CPU Smart FAN Control CPU 3-pin CPU 4-pin CPU 4-pin CPU Intel PWM Voltage PWM Voltage ( ) PWM BIOS - 56 - 2-9       Load Fail-Safe Defaults ( CMOS Setup Utility-Copyright (C) 1984-2011 Award Software MB Intelligent Tweaker(M. I. T. ) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password & Exit Load Fail-Safe Defaults Save (Y/N)?N Setup Exit Without Saving : Select Item F10: Save & Exit Setup Load Fail-Safe Defaults ) ESC: Quit F8: Q-Flash F11: Save CMOS to BIOS F12: Load CMOS from BIOS <Enter> <Y> BIOS BIOS 2-10 Load Optimized Defaults ( CMOS Setup Utility-Copyright (C) 1984-2011 Award Software       MB Intelligent Tweaker(M. I. T. ) Load Fail-Safe Defaults Standard CMOS Features Load Optimized Defaults Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup Save & Exit Load Optimized Defaults (Y/N)?N Setup PC Health Status Exit Without Saving : Select Item F10: Save & Exit Setup Load Optimized Defaults ) ESC: Quit F8: Q-Flash F11: Save CMOS to BIOS F12: Load CMOS from BIOS <Enter> <Y> BIOS BIOS CMOS BIOS - 57 - BIOS 2-11 Set Supervisor/User Password ( CMOS Setup Utility-Copyright (C) 1984-2011 Award Software       MB Intelligent Tweaker(M. I. T. ) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management SetupEnter Password: PC Health Status : Select Item F10: Save & Exit Setup Change/Set/Disable Password Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving / ) ESC: Quit F8: Q-Flash F11: Save CMOS to BIOS F12: Load CMOS from BIOS BIOS <Enter> 8 <Enter> Supervisor ( up User ( tem ) BIOS Advanced BIOS Features BIOS Advanced BIOS Features BIOS Password Check SysPassword Check Set- System ) BIOS BIOS <Enter> <Enter> PASSWORD DISABLED BIOS BIOS BIOS - 58 - 2-12 Save & Exit Setup ( CMOS Setup Utility-Copyright (C) 1984-2011 Award Software       MB Intelligent Tweaker(M. I. T. ) Load Fail-Safe Defaults Standard CMOS Features Load Optimized Defaults Save to CMOS and EXIT (Y/N)?Y Advanced BIOS Features Set Supervisor Password Integrated Peripherals Set User Password Power Management Setup Save & Exit Setup PC Health Status Exit Without Saving : Select Item F10: Save & Exit Setup Save Data to CMOS ) ESC: Quit F8: Q-Flash F11: Save CMOS to BIOS F12: Load CMOS from BIOS <N> <Enter> <Esc> <Y> BIOS 2-13 Exit Without Saving ( CMOS Setup Utility-Copyright (C) 1984-2011 Award Software       MB Intelligent Tweaker(M. I. T. ) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status : Select Item F10: Save & Exit Setup Abandon all Data Load Fail-Safe Defaults Load Optimized Defaults Quit Without Saving (Y/N)?N Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving F11: Save CMOS to BIOS F12: Load CMOS from BIOS ) ESC: Quit F8: Q-Flash <N> <Enter> <Esc> <Y> BIOS BIOS - 59 - BIOS BIOS - 60 - • • ( Run. exe) 3-1 Xpress Install Xpress Install Xpress Install • • • Xpress Install ) ( Xpress Install • ? ) Windows XP ( USB 2. 0 \ Windows XP Service Pack 1 ( ) ( USB 2. 0 ) - 61 - 3-2 3-3 ( ) - 62 - 3-4 3-5 - 63 - 3-6 Download Center BIOS BIOS Download Center 3-7 - 64 - 4-1 Xpress Recovery2 Xpress Recovery2 NTFS FAT32 FAT16 PATA SATA • Xpress Recovery2 • Xpress Recovery2 ( 10 GB • • • • 512 MB • VESA • Windows XP SP1( ( ) Xpress Recovery2 ) ) Windows Vista Windows 7 Xpress Recovery • Xpress Recovery Xpress Recovery2 Xpress Recovery2 • USB • IDE/AHCI RAID • GPT • 2. 2TB Xpress Recovery2 Windows 7 A. Windows 7 ( ( ) SATA port1 ) SATA port0/port1/port2. . . SATA port3 SATA port1 - 65 - 10 GB ( ) Xpress Recovery2 Xpress Recovery2 B. 2. Xpress Recovery2 Xpress Recovery2 startup XpressRocovery2 Xpress Recovery2 POST <F9> (Backup) Xpress Recovery2 Xpress Recovery2 Press any key to BIOS C. Xpress Recovery2 Xpress Recovery2 BACKUP - 66 - D. SATA Intel Z68 SATA SATA SATA SATA2_3 SATA2_4 SATA SATA SATA2_5 SATA ( Z68 SATA3_0 SATA3_1( ) ) SATA2_2 ( ( ( ) RAID ) SATA ) SATA 6Gb/s AHCI RAID SATA 3Gb/s - 85 - RAID B. BIOS BIOS SATA SATA BIOS Integrated Peripherals RAID POST <Delete> PCH SATA Control Mode IDE AHCI ( BIOS IDE) RAID(XHD) ( RAID 1) CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Integrated Peripherals } eXtreme Hard Drive (XHD) PCH SATA Control Mode OROM UI and Banner SATA Port0-3 Native Mode USB Controllers USB Legacy Function USB Storage Function Azalia Codec Onboard H/W 1394 Onboard H/W LAN SMART LAN Onboard LAN Boot ROM R_USB30 Controller F_USB30 Controller GSATA3 Controller GSATA3 Ctrl Mode eSATA3 Controller eSATA3 Ctrl Mode Onboard Serial Port 1 [Disabled] [RAID(XHD)] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Auto] [Enabled] [Enabled] [Press Enter] [Disabled] [Enabled] [Enabled] [Enabled] [IDE] [Enabled] [IDE] [3F8/IRQ4] Item Help Menu Level  Enter: Select : Move F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults 1 BIOS BIOS BIOS - 86 - C. RAID BIOS SATA RAID RAID BIOS SATA RAID RAID BIOS POST RAID BIOS Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. Physical Devices : Port Device Model 0 ST3120026AS 1 ST3120026AS Serial # 3JT354CP 3JT329JX Size 111. 7GB 111. 7GB ( 2) <Ctrl> + <I> Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk Press <CTRL - I> to enter Configuration Utility. . 2 <Ctrl> + <I> RAID ( 3) (Create RAID Volume) Create RAID Volume <Enter> RAID [ MAIN MENU ] Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. All Rights Reserved. 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Recovery Volume Options 5. Acceleration Options 6. Exit [ DISK/VOLUME INFORMATION ] RAID Volumes : None defined. Physical Deivces : Port Device Model 0 ST3120026AS 1 ST3120026AS Serial # 3JT354CP 3JT329JX Size 111. 7GB 111. 7GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk [hi]-Select [ESC]-Exit [ENTER]-Select Menu 3 - 87 - ( CREATE VOLUME MENU 16 4) RAID RAID 0 ) Name <Enter> RAID RAID 1 Recovery RAID 10 RAID 5 ( RAID <Enter> (RAID Level) RAID Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 111. 7 GB Sync : N/A Create Volume [ HELP ] RAID0: Stripes data (performance). [hi]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select 4 Disks <Enter> (Strip Size) ( 5) (Capacity) 4 KB 128 KB Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128KB Capacity : 111. 7 GB Sync : N/A Create Volume [ HELP ] The following are typical values: RAID0 - 128KB RAID10 - 64KB RAID5 - 64KB [hi]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select 5 - 88 - Volume <Y> <Enter> <N> ( 6) <Enter> Create Volume ( ) Create Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128 KB Capacity : 111. 7 GB Sync : N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. [ HELP ] Are you sure you want to create this volume?(Y/N) : Press ENTER to create the specified volume. [hi]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select 6 DISK/VOLUME INFORMATION ( 7) Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Recovery Volume Options 5. Acceleration Options 6. Exit [ DISK/VOLUME INFORMATION ] RAID Volumes : ID Name 0 Volume0 Level RAID0(Stripe) Strip 128KB Size 223. 6GB Size 111. 7GB 111. 7GB Status Normal Bootable Yes Physical Devices : Port Device Model 0 ST3120026AS 1 ST3120026AS [hi]-Select Serial # 3JT354CP 3JT329JX [ESC]-Exit Type/Status(Vol ID) Member Disk(0) Member Disk(0) [ENTER]-Select Menu 7 <Esc> 6. Exit <Enter> RAID - 89 - Intel (Recovery Volume Options) (Rapid Recover Technology) RAID 1 (Recovery Drive) (Master Drive) • • Recovery Volume • RAID 1. [. . . ] Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Marvell shared library for 32bit (install first) Marvell 91xx SATA RAID Controller 32bit Driver Marvell shared library for 64bit (install first) Marvell 91xx SATA RAID Controller 64bit Driver ENTER=Select F3=Exit 4 <Enter> - 102 - C. RAID 1 ) RAID 5 RAID 10 ( RAID 1 Intel Z68 SATA • Intel RAID BIOS Press <Ctrl-I> to enter Configuration Utility Intel(R) Rapid Storage Technology - Option ROM - 10. 5. 0. 1034 Copyright(C) 2003-11 Intel Corporation. [ MAIN MENU ] [ DEGRADED VOLUME DETECTED3. ] Reset Disks to Non-RAID 1. Create RAID Volume 2. Delete RAID Volume "Degraded volume and disk available for rebuilding detected. Selecting4. Exit a disk initiates a rebuild. Rebuild completes in the operating system. [. . . ]