說明書 LG GR-H52P

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . / . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 [REMOTE] DME Satellite 7 7 7 7 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 6 DME Satellite I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 DME Satellite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] CLOCK 96kHz 88. 2kHz 48kHz 44. 1kHz NETWORK MID MASTER 3 4 5 6 7 8 PEAK SIGNAL IN 1 2 PEAK 3 4 5 6 7 8 SCENE NUMBER SIGNAL OUT LINK CONDUCT NETWORK HUB AND BRIDGE LOCK ERROR 88 DME24N NHB32-C DME Satellite MY MY16-C MY16C-II CobraNet DME8i-C/DME8o-C/DME4io-C I/O [INPUT] DME Euroblock (3P) [OUTPUT] [OUTPUT] DME Designer [INPUT] DME Satellite 1. 3 mm [INPUT] Euroblock Euroblock Yamaha 3 mm 2 mm (3P) Euroblock (16P) Euroblock [GPI] 3mm • Euroblock Euroblock 7 mm GPI 5 mm • GPI 1. 3 mm Phoenix Contact 1. 6 mm 7 mm GPI 5 mm AI0, 5-6WH 7 mm GPI 5 mm 1. 6 mm GPI 1. Euroblock 2. 3. 4. Euroblock Euroblock DME8i-C/DME8o-C/DME4io-C 29 I/O [REMOTE] DME [REMOTE] RS-232C MIDI AMX AD8HR Crestron AD824 [REMOTE] DME Satellite DME Satellite DME Designer AD8HR 20 AD824 dip AD8HR AD824 AD8HR AD824 D-SUB 9-pin Interlink AD8HR AD824 DME 8 dip RS-422 AD8HR/AD824 RS-422 AD8R DME Satellite DME RS-422 INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT DME Satellite HA REMOTE 1 HA REMOTE 2 HA REMOTE 1 HA REMOTE 2 AD8HR AD8HR 30 I/O COM PC/RS-422 COM RS-422 COM PC/RS-422 COM RS-422 COM PC/RS-422 AD824 AD824 AD824 DME8i-C/DME8o-C/DME4io-C DME Satellite DME8i-C DME4io-C DME DME [REMOTE] AD8HR DME PM5D DM2000 DME Satellite [NETWORK] (+48V) D-SUB 9 REMOTE USB REMOTE INPUT PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE INPUT DME Satellite INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT DME Satellite INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT DME Satellite INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT DME Satellite • • • • DME • AD8HR DME DME ID DME Designer DME Designer DME DME Satellite GAIN ID DME DME Satellite DME Satellite RS-232C Crestron DME 20 RS-422 dip dip DME RS-232C RS-422 AMX • • DME Designer AMX Crestron DME http://www. yamahaproaudio. com/ DME Designer DME DME8i-C/DME8o-C/DME4io-C 31 I/O CobraNet CobraNet DME Satellite CobraNet DME Satellite LS9 DME8i-C DME4io-C MY16-CII [NETWORK] DME Satellite LS9 CobraNet DME (+48V) DME DME8i-C INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT DME8i-C MY16-CII 32 I/O CobraNet CobraNet LS9 • • • • DME DME DME ID DME Designer DME Designer DME ID DME DME8i-C/DME8o-C/DME4io-C PM5D PM5D DME DME Satellite PM5D DME MY16-C MY16-CII DME Satellite CobraNet , PM5D/PM5D-RH DME8i-C INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT CobraNet DME8i-C INPUT PEAK PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL PEAK SIGNAL DIGITAL MIXING ENGINE SATELLITE USB SIGNAL PEAK SIGNAL INPUT Hub CobraNet DME8o-C Hub DME8o-C Hub DME4io-C DME4io-C MY16-CII MY16-CII PM5D • • PM5D CobraNet DME DME PM5D IP DME DME PM5D DME 2 [NETWORK] AMX Crestron DME Satellite DME Satellite • • DME Designer AMX Crestron DME Remote Control ProtocolSpecifications http://www. yamahaproaudio. com/ DME Designer DME Satellite DME8i-C/DME8o-C/DME4io-C 33 I/O DME Satellite PM5D GPI GPI DME Satellite [GPI] CP4SW DME 0V GPI Euroblock 29 5V 8 GPI CP4SF CP1SF GPI 4 GPI OUT TTL DME Designer GPI Euroblock [GPI] GPI +V L 5 H Euroblock IN • • CP4SW CP4SF CP1SF DME Designer DME Designer CP4SW/CP4SF/CP1SF GPI DME Satellite GPI IN +V 10 DME LED GPI DME Satellite GPI +V GND OUT GND IN 16mA OUT GND [GPI] 16mA 34 I/O DME [GPI] DME [GPI] Euroblock Euroblock 4 3 2 1 4 3 2 1 DME [GPI] Euroblock LED 4 3 2 1 10 LED DME Designer [GPI] DME8i-C/DME8o-C/DME4io-C DME Satellite DME : DME: WAVE : WAVE DME Designer DME Satellite 1. DME RS-232C dip DME: RS-422 RS-232C : RS-422 [PEAK] [PEAK] DME [SIGNAL] I/O 2. dip dip 20 , DME8i-C/DME8o-C/DME4io-C 35 ICP1 CP4SW CP1SF CP4SF CP4SW CP1SF CP4SF DME GPI DME Designer ICP1 DME 36 DME Satellite I/O ICP1 DME IP LCD 24 DME F1–F6 [HOME] DME CP4SW CP4SF CP1SF [GPI] DME LED DME 10 10 10 10 10 0 0 0 0 0 CONTROL PANEL CONTROL PANEL CONTROL PANEL CP4SW CP4SF CP1SF DME8i-C/DME8o-C/DME4io-C LED • • • 7 [POWER] ON 19 DME DME Designer DME-N • • • • • • • • • • • • • • CobraNet . CobraNet CobraNet DME Designer DME Designer DME Designer 96 kHz DME Designer DME Designer MIDI MIDI DME Designer DME Designer DME Designer DME Designer DME Designer DME Designer MIDI MIDI GPI Off 96 kHz MIDI • • • MIDI MIDI MIDI • • • • • • MIDI MIDI DME Designer DME8i-C/DME8o-C/DME4io-C 37 I/O DME Satellite • 22, 24 • USB-MIDI • [NETWORK] • DME Designer 3. 0 • MIDI Data Format 1. MIDI functions on the DME8i-C, DME8o-C, and DME4io-C 1. 1 Scene Change Scene recall occurs according to the “MIDI Program Change Table” assignments when appropriate MIDI Bank Select MSB/LSB and Program Change messages are received by the DME8i-C/ DME8o-C/DME4io-C. When a scene recall operation is carried out via DME Designer, corresponding MIDI Bank Select MSB/LSB and Program Change messages are also transmitted by the DME8i-C/DME8o-C/ DME4io-C as specified by the “MIDI Program Change Table” assignments. Transmission does not occur while configurations are being switched. 1. 2 Parameter Control DME Satellite 3. MIDI Setup Specifies basic MIDI operation. 3. 1 Host Select Selects the input/output ports to be used for MIDI communication. 3. 2 MIDI Tx Channel Specifies the MIDI transmit channel (1 ~ 16). 3. 3 MIDI Rx Channel Specifies the MIDI receive channel (1 ~ 16). When a Program Change message is received, the scene assigned to the received program number in the “MIDI Program Change Table” is recalled. The effective Bank Select, Program Change range is as follows: Bank Select MSB: 0 Bank Select LSB: 0-7 Program Change No. : 0-127 Receive When the “Control Change Rx Switch” is on, Control Change messages are received on the MIDI channel specified by the “MIDI Rx Channel” parameter. If the “Control Change Omni Switch” is also on, however, Control Change messages will be received on all MIDI channels regardless of the “MIDI Rx Channel” setting. Control Change parameter resolution is 128 regardless of the effective range of the parameter. For finer settings use Parameter Change. Transmit When the “Control Change Tx Switch” is on and a parameter is edited via DME Designer, appropriate Control Change data will be transmitted as specified by the “MIDI Control Change Table” and “MIDI Tx Channel” settings. Refer to “Supplementary Information 1” for cases in which multiple messages are assigned to a single parameter. Status Data Bnh (1011nnnnb) cch (0cccccccb) vvh (0vvvvvvvb) Control Change Control Change No. (1-31, 3395, 102-119) Control Value (0-127) Transmit When the “Program Change Tx Switch” is on and a scene is switched from DME Designer, the corresponding Program Change number will be transmitted as specified by the “MIDI Program Change Table” and “MIDI Tx Channel” settings. Transmission does not occur when a scene with a different configuration is selected. If multiple Program Change numbers are assigned to a single scene, the Bank Select MSB/LSB and Program Change number corresponding to the lowest number will be transmitted. 4. 4 Parameter Change (F0h - F7h) Receive When the “Parameter Change Rx Switch” is On, Parameter Change messages are received on the MIDI channel specified by the “Device ID (Rx Ch)” parameter. DME8i-C/DME8o-C/DME4io-C 39 I/O DME Satellite Bank Select LSB Transmit When the “Parameter Change Tx Switch” is On and a parameter is edited via DME Designer, appropriate Parameter Change data will be transmitted as specified by the “MIDI Parameter Change Table” and “MIDI Tx Channel” settings. Refer to “Supplementary Information 1” for cases in which multiple messages are assigned to a single parameter. [. . . ] 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 O octet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 I/O [OUTPUT] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 P [PEAK] [POWER] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 E [ERROR] Euroblock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]