說明書 IRIVER CLIX GENERATION 2 - QUICK START GUIDE

[. . . ] 10 PM5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PM5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 DSP5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 PM5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In the data portion, seven words of 8-bit data are converted into eight words of 7-bit data. [Conversion from actual data to bulk data] d[0. 7]: bulk data b[0] = 0; for( I=0; I<7; I++){ if( d[I]&0x80){ b[0] |= 1<<(6-I); } b[I+1] = d[I]&0x7F; } PM5D/CLIX V2 / DSP5D 369 MIDI [Recovery from bulk data to actual data] d[0. 7]: bulk data for( I=0; I<7; I++){ b[0] <<= 1; d[I] = b[I+1]+(0x80&b[0]); } 4. 2 Current Scene, Setup, Backup, Input Patch, Output Patch, HA Data – Parameter request – 4. 2. 1 Format Reception This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. This message is echoed if [Parameter change ECHO] is ON. When this is received, the value of the specified parameter is transmitted as a Parameter Change. SUB STATUS GROUP ID MODEL ID DATA Category DATA 11110000 01000011 0001nnnn 00111110 00001111 0ccccccc 0eeeeeee 0iiiiiii 0ccccccc 11110111 F0 43 3n 3E 0F cc ee ii cc F7 System exclusive message Manufacture’s ID number (IRIVER) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D Element No *1 Index No *1 Channel No *1 End of exclusive 3. 3 PARAMTER CHANGE Reception This message is echoed if [Parameter change ECHO] is ON. This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. When a parameter change is received, the specified parameter will be controlled. When a parameter request is received, the current value of the specified parameter will be transmitted as a parameter change with its Device Number as the [Rx CH]. Transmission If [Parameter change TX] is ON, and you edit a parameter for which control change transmission has not been enabled, a parameter change will be transmitted with the [Tx CH] as its device number. SUB STATUS GROUP ID MODEL ID DATA CATEGORY FUNCTION NAME 11110000 01000011 0011nnnn 00111110 00001111 00000000 F0 43 3n 3E 0F 00 System exclusive message Manufacture’s ID number (IRIVER) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D OTHER DATA 01101001 01100010 01010000 01110010 01110100 01100011 01011111 MODULE NAME 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm DATA 0mmmmmmm 0mmmmmmm 0ddddddd EOX 11110111 F7 End of exclusive 4. 5. 5 Protect (Parameter request) format Reception When this is received, a parameter change is transmitted with [Rx CH] as the device number. SUB STATUS GROUP ID MODEL ID DATA CATEGORY 11110000 01000011 0011nnnn 00111110 00001111 00000000 F0 43 3n 3E 0F 00 System exclusive message Manufacture’s ID number (IRIVER) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D OTHER DATA 01001100 "L" (ASCII CODE) 01101001 "i" (ASCII CODE) 01100010 "b" (ASCII CODE) 372 PM5D/CLIX V2 / DSP5D FUNCTION NAME 01001100 "L" (ASCII CODE) "i" (ASCII CODE) "b" (ASCII CODE) "P" (ASCII CODE) "r" (ASCII CODE) "t" (ASCII CODE) "c" (ASCII CODE) "_" (ASCII CODE) mm (ASCII CODE) See 4. 5. 6 mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mh number High ml number Low F7 End of exclusive 01101001 01100010 01010000 01110010 01110100 01100011 01011111 MODULE NAME 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm DATA 0mmmmmmm 0mmmmmmm EOX 11110111 EOX 11110111 F7 End of exclusive *1 If this portion is repeated multiple times, this means that a single packet contains link data for multiple libraries. 4. 5. 8 Link format (Parameter request) Reception When this is received, a parameter change is transmitted with [Rx CH] as the device number. For the function and number, refer to the table in 4. 5. 7. SUB STATUS GROUP ID MODEL ID DATA CATEGORY FUNCTION NAME 11110000 01000011 0011nnnn 00111110 00001111 00000000 F0 43 3n 3E 0F 00 System exclusive message Manufacture’s ID number (IRIVER) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D OTHER DATA 01001100 "L" (ASCII CODE) 4. 5. 6 Protect module names MODULE NAME SCENE LIB “SCENE___” number 0-500, 512 (0:response only) size 16 4. 5. 7 Link format (Parameter change) Reception This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. This message is echoed if [Parameter change ECHO] is ON. When the message is received, the link settings of the specified memory/library will be edited. Transmission In response to a request, a Parameter Change message is transmitted on the [Rx CH]. If [Parameter change ECHO] is ON, the message is transmitted without change. SUB STATUS GROUP ID MODEL ID DATA CATEGORY FUNCTION NAME 11110000 01000011 0001nnnn 00111110 00001111 00000000 F0 43 1n 3E 0F 00 System exclusive message Manufacture’s ID number (IRIVER) n=0-15 (Device number=MIDI Channel) Digital mixer PM5D OTHER DATA 01001100 "L" (ASCII CODE) "i" (ASCII CODE) "b" (ASCII CODE) "L" (ASCII CODE) "i" (ASCII CODE) "n" (ASCII CODE) "k" (ASCII CODE) "_" (ASCII CODE) mm (ASCII CODE) See 4. 5. 9 mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mm (ASCII CODE) mh library number High ml library number Low mm linked library (ASCII CODE) *1 See 4. 5. 10 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mm linked library (ASCII CODE) *1 mh linked library number High *1 ml linked library number Low *1 dd data (unlinked:0, linked:1) *1 01101001 01100010 01010000 01101001 01101110 01101011 01011111 MODULE NAME 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm DATA 0sssssss 0sssssss 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0mmmmmmm 0ddddddd 01101001 "i" (ASCII CODE) 01100010 "b" (ASCII CODE) 01010000 "L" (ASCII CODE) 01101001 "i" (ASCII CODE) 01101110 "n" (ASCII CODE) 01101011 "k" (ASCII CODE) 01011111 "_" (ASCII CODE) MODULE NAME 0mmmmmmm mm (ASCII CODE) See 4. 5. 9 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) DATA 0sssssss mh library number High 0sssssss ml library number Low 0mmmmmmm mm linked library (ASCII CODE) *1 See 4. 5. 10 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 0mmmmmmm mm linked library (ASCII CODE) *1 EOX 11110111 F7 End of exclusive *1 If this portion does not exist, it is assumed that all information for the specified library and number is being requested. 4. 5. 9 Library module names MODULE NAME SCENE LIB "SCENE___" number 0-500, 512 (0:response only) 4. 5. 10 Linked library module names MODULE NAME INPATCH LIB OUTPATCH LIB HA LIB number "INPATCH_" "OUTPATCH" "HA______" 0- 99 0- 99 0-199 PM5D/CLIX V2 / DSP5D 373 MIDI 4. 6 Exist Library Range 4. 6. 1 Format (Parameter change) Transmission When PM5D receives Library Exist request command from outside, the answer will be sent back with the following Parameter change. This packet shows smallest library number range that exists and not read only. [. . . ] DECDE HPF INSERT (x4) (x8) Digital BUS MASTER OUTPUT DCA MASTER EQ PAN Adder INSERT (x8/4) INSERT COMP INSERT LEVEL BAL (x2) INSERT DELAY PATCH DA ON Analog Analog dBu Digital dBFS Bit GAIN CASCADE IN*2 CASCADE OUT*2 IN IN IN Digital Clipping Level IN +30 +24 +20 +10 +4 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 -170 -180 -190 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 -170 -180 -190 -200 -210 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Max. Input [+30dBu] INSERT IN IN IN IN IN Max. Output [+24dBu] +30 +24 +20 +10 +4 0 -10 -20 -30 Nominal [+10dBu] Input OUT OUT OUT OUT OUT OUT OUT Nominal Output [+4dBu] default setting OMNI OUT1-24 Max. Input [-42dBu] CASCADE IN*1 CASCADE OUT*1 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 Max. [. . . ]