說明書 HP DESKJET 1600C DESKJET 1600C型錄

[. . . ] HP shall not be liable for technical or editorial errors or omissions contained herein. © 2007 Hewlett-Packard Development Company, L. P. Windows, Windows 2000, and Windows XP are U. S. registered trademarks of Microsoft Corporation. [. . . ] Select the HP Photosmart you want to connect. Follow the prompts to install the software. When you have finished installing the software, the HP Photosmart is ready for use. If you disabled any virus detection software on your computer, make sure to enable it again. To test your network connection, go to your computer and print a self-test report to the HP Photosmart. Connect to additional computers on a network You can share the HP Photosmart on a network so that more computers can use it. If the HP Photosmart is already connected to a computer on the network, you must install the HP Photosmart software for each additional computer. During the installation, the software will discover the HP Photosmart on the network for each of the computers. Once you have set up the HP Photosmart on the network you will not need to configure it again when you add additional computers. NOTE: You can connect the HP Photosmart to either a wireless or wired network, but not both at the same time. English 16 Change the HP Photosmart from a USB connection to a network connection If you first install the HP Photosmart with a USB connection, you can later change to either a wireless or Ethernet network connection. If you already understand how to connect to a network, you can use the general directions below. NOTE: For optimal performance and security in your wireless network, use an access point (such as a wireless router) to connect the HP Photosmart. Restore network defaults You can reset the network settings to what they were when you purchased the HP Photosmart. CAUTION: This will erase all wireless setup information that you have entered. In order to restore this information, you will need to run the Wireless Setup Wizard again. NOTE: If the menu option you want is not visible on the screen, touch to scroll through all the menu options. Turn the wireless radio on and off The wireless radio is off by default. In order to stay connected to a wireless network, the radio must stay on. When the radio is on, the blue light on the front of the HP Photosmart is lit. However, if the HP Photosmart is connected to a wired network or you have a USB connection, the radio is not used. In this case you might want to turn the radio off. NOTE: If the menu option you want is not visible on the screen, touch to scroll through all the menu options. or or English 18 HP Photosmart D7400 series Print the wireless network test The wireless network test performs a series of diagnostic tests to determine whether network setup is successful. [. . . ] Improper maintenance or modification; b. Software, media, parts, or supplies not provided or supported by HP; c. Operation outside the product's specifications; d. For HP printer products, the use of a non-HP cartridge or a refilled cartridge does not affect either the warranty to the customer or any HP support contract with the customer. [. . . ]