說明書 EPSON STYLUS PHOTO R350

[. . . ] EPSON shall not be liable for technical or editorial errors or omissions contained herein. © 2007 Hewlett-Packard Development Company, L. P. Windows, Windows 2000, and Windows XP are U. S. registered trademarks of Microsoft Corporation. [. . . ] Reinstall the EPSON Photosmart software. CAUTION: Do not connect the USB cable to the computer until prompted by the software installation screen. For support contact information, see the inside back cover of this guide. Uninstall and reinstall the software If your installation is incomplete, or if you connected the USB cable to the computer before prompted by the software installation screen, you might need to uninstall and then reinstall the software. Do not simply delete the EPSON All-in-One application files from your computer. Make sure to remove them properly using the uninstall utility provided when you installed the software that came with the EPSON All-in-One. To uninstall from a Windows computer and then reinstall 1. Open the Windows control panel and double-click Add or Remove Programs. Select EPSON Deskjet All-in-One Driver Software, and then click Change/Remove. Disconnect the product from your computer. NOTE: It is important that you disconnect the product before restarting your computer. Do not connect the product to your computer until after you have reinstalled the software. Cause: You pressed the On button too quickly. I connected the USB cable, but I am having problems using the EPSON All-in-One with my computer Solution: You must first install the software that came with the product before connecting the USB cable. During installation, do not plug in the USB cable until prompted by the onscreen instructions. Connecting the USB cable before prompted can cause errors. Once you have installed the software, connecting your computer to the product with a USB cable is straightforward. Simply plug one end of the USB cable into the back of your computer and the other into the back of the product. You can connect to any USB port on the back of your computer. EPSON Deskjet F4200 All-in-One series For more information on installing the software and connecting the USB cable, see the Setup Guide that came with the EPSON All-in-One. The EPSON All-in-One does not print Solution: If the product and computer are not communicating with each other, try the following: • Look at the On button located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to both the product and the power adapter and plugged into a power outlet. Press the On button to turn on the product. • Make sure the print cartridges are installed. • Make sure you have paper loaded in the input tray. [. . . ] Improper maintenance or modification; b. Software, media, parts, or supplies not provided or supported by EPSON; c. Operation outside the product's specifications; d. For EPSON printer products, the use of a non-EPSON cartridge or a refilled cartridge does not affect either the warranty to the customer or any EPSON support contract with the customer. [. . . ]