說明書 EPSON STYLUS C60 联机手册

[. . . ] EPSON shall not be liable for technical or editorial errors or omissions contained herein. © 2007 Hewlett-Packard Development Company, L. P. Windows, Windows 2000, and Windows XP are U. S. registered trademarks of Microsoft Corporation. [. . . ] For information about loading other paper sizes, see the onscreen Help. Place your original with the side you want to copy or scan face down on the left front corner of the glass. TIP: To get the correct copy size, make sure that there is no tape or other foreign object on the glass. 6 EPSON Deskjet F4100 All-in-One series 3. Close the lid. Make a copy You can make quality copies from the control panel. To make a copy from the control panel 1. Make sure you have paper loaded in the input tray. Place your original with the side you want to copy or scan face down on the left front corner of the glass. Press the Paper Type button to set the paper type. Press Start Copy Black or Start Copy Color. Scan an original For original documents or images placed on the glass, you can start a scan from your computer or from the EPSON All-in-One. To use the scan features, the EPSON All-in-One and computer must be connected and turned on. The EPSON Photosmart Software must also be installed and running on your computer prior to scanning. Place your original with the side you want to copy or scan face down on the left front corner of the glass. Follow the onscreen instructions and the instructions provided in the Setup Guide that came with the EPSON All-in-One. When the software installation is complete, the EPSON Digital Imaging Monitor icon appears in the Windows system tray. To verify that the software is properly installed, double-click the EPSON Solution Center icon on the desktop. If the EPSON Solution Center shows the essential icons (Scan Picture and Scan Document), the software has been properly installed. To uninstall from a Mac and then reinstall 1. Disconnect the EPSON All-in-One from your Mac. Open the Applications:Hewlett-Packard folder. English 8 EPSON Deskjet F4100 All-in-One series 3. After the software is uninstalled, disconnect the EPSON All-in-One, and then restart your computer. NOTE: It is important that you disconnect the EPSON All-in-One before restarting your computer. Do not connect the EPSON All-in-One to your computer until after you have reinstalled the software. 5. [. . . ] In the Device Support area, click Onscreen Guide or Troubleshooting. EPSON Web site If you have Internet access, you can get help and support from the EPSON Web site at www. hp. com/ support. This Web site offers technical support, drivers, supplies, and ordering information. Ink usage Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information, see www. hp. com/go/inkusage. [. . . ]