說明書 CITIZEN SDC-011S

[. . . ] Do not expose the shaver to temperatures higher than 50 °C for extended periods of time. • Using the special cord set (7), connect the shaver to an electrical outlet with the motor switched off. • When charging for the first time, leave the shaver to charge continuously for 4 hours. [. . . ] • The green charging light (4) shows that the shaver is being charged. When the batteries are fully charged, the charging light intermittently blinks on and off. This indicates that the battery maintains its full capacity. • Once the shaver is completely charged, discharge the shaver through normal use. Subsequent charges will take about 1 hour. 9 • A full charge provides up to 45 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. 10 • Next, switch off the shaver, remove the shaver Foil & Cutter cassette (1) and let it dry. • If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer (2) and shaver Foil & Cutter cassette (1) (picture). Alternatively, you may clean the shaver using a brush: • Switch off the shaver. Remove the shaver Foil & Cutter cassette and tap it out on a flat surface. • Using a brush, clean the inner area of the shaver head. [. . . ] • Using a brush, clean the inner area of the shaver head. However, do not clean the shaver Foil & Cutter cassette with a brush (picture) as this may damage it. Keeping your shaver in top shape To maintain 100% shaving performance, replace the shaver Foil & Cutter cassette (1), at least every 18 months or when worn. Foil & Cutter cassette: 32B/32S Preserving the batteries In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. [. . . ]