說明書 YAMAHA DM-2000 VERSION 2

[. . . ] ZH PS 6 3 • • • • • • AC • • • • • • • DM2000 mini-YGDAI AC ( ) AC Yamaha Yamaha • • AC ( ) • AC • — — — — DM2000 2 4 • • • AC • MB2000 • • • • MB2000 MB2000 MB2000 DM2000 AC DM2000 AC • AC • • • AC • • • XLR (–) TRS – 1– – 2– (+) – 3– • • WARNING Low Battery!( ) • • • D-sub MIDI Bulk Dump DM2000 2 SmartMedia 5 • SmartMedia • • • • • • • • SmartMedia ( SmartMedia • • • CARD • • SmartMedia SmartMedia (SmartMedia ) SmartMedia SmartMedia CARD SmartMedia SmartMedia ) SmartMedia SmartMedia SmartMedia CARD SmartMedia SmartMedia DM2000 DM2000 DM2000 ADAT MultiChannel Optical Digital Interface ADAT Alesis Alesis Apogee Apogee Electronics, Inc. Apple Mac Corporation Power Macintosh Mac OS Apple Corporation, Inc. Intel Pentium Intel Corporation Nuendo Steinberg Media Technologies AG Pro Tools Digidesign / Avid Technology, Inc. [. . . ] The parameters that can be set are defined in the Control Change Assign Parameter List. If [NRPN] is selected, these messages are received if [Control Change Rx] is ON and the [Rx CH] matches, and will control the parameter that is specified by the four messages NRPN control number (62h, 63h) and Data Entry control number (06h, 26h). Parameter settings are defined in the Control Change Assign Parameter List. Transmission If [TABLE] is selected, operating a parameter specified in the [Control assign table] will cause these messages to be transmitted if [Control Change Tx] is ON. The parameters that can be specified are defined in the Control Change Assign Parameter List. If [NRPN] is selected, operating a specified parameter will cause data to be DM2000 2 370 C MIDI transmitted on the [Tx CH] if [Control Change Tx] is ON, using the four messages NRPN control number (62h, 63h) and Data Entry control number (06h, 26h). Parameter settings are defined in the Control Change Assign Parameter List. This data cannot be transmitted via Program Change to Studio Manager since there is no guarantee that the contents of the tables will match. (Parameter Change messages will always be used. ) 4. PROGRAM CHANGE (Cn) If [TABLE] is selected STATUS DATA 1011nnnn Bn Control change 0nnnnnnn nn Control number (0-95, 102-119) 0vvvvvvv vv Control Value (0-127) Reception If [Program Change ECHO] is ON, these messages are echoed. If [Program Change RX] is ON and the [Rx CH] matches, these messages will be received. However if [OMNI] is ON, they will be received regardless of the channel. When a message is received, a Scene Memory will be recalled according to the settings of the [Program Change Table]. Transmission If [Program Change TX] is ON, this message is transmitted according to the settings of the [Program Change Table] on the [Tx CH] channel when a scene memory is recalled. If the recalled scene has been assigned to more than one program number, the lowest-numbered program number will be transmitted. Transmission to Studio Manager using Program Change messages will not be performed since there is no guarantee that the contents of the tables will match. (Parameter Changes will always be used. ) STATUS DATA 1100nnnn Cn Program change 0nnnnnnn nn Program number (0-127) Formula for converting Control values into parameter data: paramSteps= paramMax - paramMin + 1; add= paramWidth / paramSteps; mod= paramWidth - add * paramSteps; curValue= parm * add + mod / 2; (1) When the assigned parameter can be set in 128 steps or less: paramWidth = 127; rxValue = Control value; (2) When the assigned parameter can be set in 128 through 16383 steps: paramWidth = 16383; (2-1) When both High and Low data are received: rxValue = Control value (High) * 128 + Control value (Low); (2-2) When only Low data is received: rxValue = (curValue & 16256) + Control value (Low); (2-3) When only High data is received: rxValue = Control value (High) * 128 + (curValue & 127); (3) When the assigned parameter can be set in 16384 through 2097151 steps: paramWidth = 2097151; (3-1) When High, Middle, and Low data are received: rxValue = Control value (High) * 16384 + Control value (Middle) * 128 + Control value (Low); (3-2) When only Low data is received: rxValue = (curValue & 2097024) + Control value (Low); (3-3) When only Middle data is received: rxValue = (curValue & 2080895) + Control value (Middle) * 128; (3-4) When only High data is received: rxValue = (curValue & 16383) + Control value (High) * 16384; (3-5) When Middle and Low data are received: rxValue = (curValue & 2080768) + Control value (Middle) * 128 + Control value (Low); (3-6) When High and Low data are received: rxValue = (curValue & 16256) + Control value (High) * 16384 + Control value (Low); (3-7) When High and Middle data are received: rxValue = (curValue & 127) + Control value (High) * 16384 + Control value (Middle) * 128; if ( rxValue > paramWidth) rxValue = paramWidth; param = ( rxValue - mod / 2) / add; 5 MIDI TIME CODE QUARTER FRAME(F1) Reception This is echoed if [OTHER COMMANDS ECHO] is ON. Automix synchronizes this if the data is received at the port specified by the TIME REFERENCE setting. STATUS DATA 1100nnnn F1 Quarter frame message 0tttdddd td Type & data 6. SONG POSITION POINTER (F2) Reception If this is received when the automix TIME REFERENCE setting is MIDI CLOCK, the automix will move to the song position that was received. STATUS DATA 11110010 F2 Song position pointer 0vvvvvvv vv Song position LSB 0vvvvvvv vv Song position MSB 7. TIMING CLOCK (F8) Reception If the automix TIME REFERENCE setting is MIDI CLOCK, this message is used to synchronize automix. [. . . ] Mode 2: OMNI ON, MONO Mode 4: OMNI OFF, MONO O: Yes X: No Mode 1: OMNI ON, POLY Mode 3: OMNI OFF, POLY For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Yamaha NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 POLAND Yamaha Music Europe GmbH Branch Sp. z o. o. 17 Stycznia 56, PL-02-146 Warszawa, Poland Tel: 022-868-07-57 ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]